How to Connect HP Envy 5660 Printer to Wifi

Connect HP Envy 5660 Printer to Wifi, Wireless Network, Computer, PC, Mac

Sure, you can Connect HP Envy 5660 Printer to Wifi and a computer, and use a printer driver to connect. A printer driver is required to complete the install. Verify that you follow the instructions below to connect my 5660 hp envy to my machine.

Setting up a HP Printer includes:

hp printer setup

When you own a new 5660 HP Envy, you will install it before you can start using the printer. HP Envy 5660 wireless setup can be installed in three phases:

  • Hardware setup
  • Wireless setup
  • Software setup

System configuration also involves configuring the physical parts of the HP Envy 5660 printer. Wireless setup is designed to link the printer without any physical connection to your wi-fi network. The software setup now manages the HP Envy 5660 printer and the download and installation program from 123.hp.com/envy5660.

HP Envy 5660 Hardware setup – HP Envy 5660 wireless setup

  • First, open the package, and check if the package contains all the parts in the set.
  • Then, remove all packing materials and protective tapes from the printer’s exterior and interior.
  • Next, find the power cord and connect it to the electric outlet from the printer’s rear end.
  • Press the power button now, and turn the printer on.
  • Next, follow the control panel instructions to finish the setup.
  • Now, load paper in the paper tray by pulling it to open, insert paper and push.
  • You have to bring the cartridges in now. To do so, open the access door on top of the printer and raise the lid onto the carriage window. Then cut the plastic tape and drop the cartridge into the empty slot. Now lock the lid and the entrance door.

Immediately after this the printer begins the alignment process automatically. If not, you can do it by clicking the Setup button on the control panel, too. Configuration – > Tools-> Printer alignment. Now, the cycle of alignment begins, and an alignment page is written.

HP Envy 5660 Software Setup – 123.hp.com/setup 5660, HP Envy 5660 Wifi Setup

  • To install the 123.hp.com/setup 5660 Printer driver

HP Envy 5660 Software Setup for Windows:

  • After the wireless setup is done, remove any USB cable connected to the printer.
  • Now go to 123.hp.com/setup 5660 or 123.hp.com/envy5660
  • Then, confirm your printer model and go to the download page.  Now, you can download either the full feature driver or Basic Driver.

HP Envy 5660 Software Setup for Mac:

  • Software setup for Mac is similar to that of Windows.  After choosing the connection type, wireless setup is done, remove any USB cable connected to the printer.
  • Now go to 123.hp.com/setup 5660 or 123.hp.com/envy5660
  • Then, confirm your printer model and go to the download page.

Also, the HP install assistant lets you recognize the operating system that you are using in the device where the driver will be installed. This also defines other data and recommends you the correct printer driver based on that. Now, just download the full function driver or a Simple Driver.

HP Envy 5660 Wireless setup – Windows / Mac

HP Envy 5660 Wireless Setup for Windows: 

Place your printer near the machine, first. Then, HP program installer will now take the steps to connect your printer to the wireless network.

Two options are also provided:

  1. HP Auto Wireless Connect
  2. The ‘Printer Network Connection’

Choose Yes for HP Auto Wireless Connect, and connect my router- > Next. Now, follow the on-screen instructions to complete HP Envy 5660 printer wireless network setup. Pick one of the following for ‘Printer Network Display’ as per the instructions on the screen:

Related Blog: Setup HP Envy 5055 Wireless Printer

If the IP address of the HP Envy 5660 printer isn’t known, select Not Connected-> Wireless Off-> Next. If you know the IP address of your HP Envy 5660 printer, choose Connected first, enter the IP Address and then press Next. Then follow the on-screen instructions for completing HP Envy 5660 printer wireless network configuration.

HP Envy 5660 Wireless Setup for Mac:

Place your printer near the machine, first. Installer HP program also performs the steps to connect your printer to the wireless network.

Two options are also provided:

  1. HP Auto Wireless Connect(Initial setup only)
  2. Wireless setup using a USB connection.

For HP Auto Wireless Connect, you must first select HP Envy 5660 and click Continue. Then follow the on-screen instructions for completing HP Envy 5660 printer wireless network configuration. In order to set up Wireless using a USB link, you need to connect the USB cable to your HP Envy 5660 printer, pick the printer and click on Start.

Then follow the on-screen instructions for completing HP Envy 5660 printer wireless network configuration.