How To Fix HP LaserJet Pro M1132 Error E8?

HP LaserJet Pro M1132 Error E8

The aforesaid technical error code is caused due to problems with the scanner carriage within user’s device. So, without delaying, Fix HP LaserJet Pro M1132 error E8 with professional guidelines available with us. However, once carriage movement stalls, the printer will start responding automatically by sending an error light message. Well, the main cause of the irregularity may be due to software issues or breakage in the scanner motor connection or even can be due to technical fault in a motor itself. Follow below instruction to remove the error code by applying simple steps that are mentioned below.

Steps to fix HP Laser Jet Pro M1132 error E8

Step 1: Place your printer device over a sturdy place, most probably in a well-lighted or in a ventilated area. A screw driver, a clean rag and alcohol is required to fix HP Laser Jet Pro error E8 completely. Move onto the next step.

Step 2: Now, open up the main printer cover as well as its smaller inner over. Ensure to unlock the ink cartridge lever by just holding its handle and pull it out.

Step 3: Have a look for your printer roller and un clip it from the holder. Hold these rollers to clean out with the rag damped up in alcohol, allow it to dry. This needs a thorough cleaning process to completely remove dust and all accumulated ink as well as other particles that is coating the device surface.

HP LaserJet Pro M1132 Error E8

Step 4: Clip the roller back to your printer holder to rectify its re-installation process.

Step 5: Turn on the printer sideways and have a look for its jack which is located at the back side and remove its two nuts. Now, pull out the jack.

Step 6: Clean out its black printer roller which is just inside it and reinstall it back to its jack.

Step 7: To fix HP LaserJet Pro error E8, just re-install ink cartridges back to lock its lever down and hold it securely.

Step 8: Close your device and power it up.  If you see error lights blinking on the screen then, open-up you scanner cover. Apply oil on your drive and close the scanner. Power-up the printer again.

Related Blog:How To Fix HP Notebook Missing Operating System Error Message?

Connect to our expert team +1-877-977-6597 to get world-class support solutions at your desk

We are available at  HP Technical Support  to provide full assistance to our customers and get them the most appropriate remedy. We encourage users to connect with our team and discuss their related issues to help us convey the suitable choice solutions. Our team is engrossed with skilled and competent professionals who are ready to explain every cause of issue. Feel free to connect with us anytime and get hassle free solutions at your desk.